562.00 Euro € Ball Float Steam Trap Supplier in Europe Berlin

ValvesOnly Europe is the prominent Ball Float Steam Trap Supplier in Europe. It is a mechanical device that works on the differential density between steam and condensate. It removes condensates or distillates from the system. This type of steam trap is commonly used in systems with automated temperature control functions like jacketed vessels, dryers, etc. They are highly efficient in removing condensates as soon as they form within the system.  This prevents the water hammering and helps to maintain steam quality.

Working Principle

1.     Operation: the ball float will rise whenever the condensates enter the trap. This mechanical action will cause the valve to lift from its seat and the condensates will be discharged. The steam will be prevented from escaping as the valve will remain submerged. Since the steam is less dense than the condensates.

2.     The float will be connected to a lever mechanism which opens the discharge valve, as it rises. This helps to remove the condensates continuously.  So the rising condensate level will push the ball float to rise.

3.     Components: it has a thermostatic vent that helps to release the initial air and non-condensable gases, improving efficiency during the operation.

Advantages

·       Continuous discharge: they discharge the condensates continuously from the system, at steam temperatures. So highly recommended in systems with high heat transfer rates.

·       Versatility: Good for both heavy and light condensate loads.

·       Do not get effected by sudden pressure variations or flow rates

·       Durable and Robust

·       Highly Efficient

·       Resistant to Water Hammer

Industrial Applications

ValvesOnly Europe is the best Ball Float Steam Trap Supplier in Europe. It is used across wide range of Industrial applications including:

1.     Chemical processing units

2.     Petrochemical industries

3.     HVAC Systems

4.     Textile Industries

5.     Paper and Pulp Industries

6.     Automotive sectors

7.     Marine industries

8.     Oil and Gas industries

9.     Power Generation plants

Description

·       Available materials: Cast iron, WCB, WCC, WC6, LCC, LCB, Titanium, SS304, SS316, CF8, CF8M , F55, F51, F53, Monel, Ductile Iron.

·       Available Size: ½” to 48”

·       Class: 150 to 2500

·       Nominal Pressure: PN10 to PN450

·       Medium: LNG, Cryogenic application, Water, Air, Steam, Oil

·       Ends: Flanged, Threaded, Buttweld, Socket weld

·       Operations: Lever Operated, Electric Actuated and Pneumatic Actuated, Gear

Contact seller Share